Design preview · forms don’t send

Sapper HVAC Blog · 3 min read

Heat Pump SEER2 Ratings Explained for Arizona Homeowners

Shopping for a heat pump in Phoenix, Mesa, or Chandler AZ? Sapper HVAC explains heat pump SEER2 and HSPF2 ratings and what they mean for Arizona's climate.

Contents · 7 sections
  1. Two Ratings for One System
  2. Current Minimum Standards for Arizona
  3. Which Rating Matters More in Arizona?
  4. What SEER2 and HSPF2 Ratings to Look for in Arizona
  5. Variable Speed vs. Single Stage
  6. Recent Customer Feedback
  7. Ready to get a free estimate?

Sapper HVAC

June 21, 2026

If you're shopping for a heat pump replacement in Phoenix, Chandler, Mesa, Gilbert, Tempe, or the surrounding Phoenix metro area, you'll encounter two efficiency ratings: SEER2 and HSPF2. Both matter — but they matter differently in Arizona's unique climate.

Two Ratings for One System

  • SEER2 (Seasonal Energy Efficiency Ratio 2): Measures cooling efficiency. Higher SEER2 = more efficient cooling.
  • HSPF2 (Heating Seasonal Performance Factor 2): Measures heating efficiency. Higher HSPF2 = more efficient heating.

Current Minimum Standards for Arizona

  • Minimum SEER2: 14.3 for split-system heat pumps
  • Minimum HSPF2: 7.5 for split-system heat pumps

Quality heat pumps today range from 15–22 SEER2 and 8.0–10.5 HSPF2.

Which Rating Matters More in Arizona?

In the Phoenix metro area, SEER2 matters far more than HSPF2. Arizona's cooling season runs approximately 8–10 months. Your heat pump will spend the vast majority of its operating hours in cooling mode. A heat pump that is SEER2 20 / HSPF2 8.0 will save you far more money over its lifespan in Arizona than a heat pump that is SEER2 16 / HSPF2 10.0.

Exception: For homeowners in Anthem, New River, Fountain Hills, and Apache Junction where winter heating use is more significant, HSPF2 matters more than it does on the valley floor.

What SEER2 and HSPF2 Ratings to Look for in Arizona

Valley Floor Communities

  • Minimum recommended: 15 SEER2 / 7.5 HSPF2
  • Best value: 17–18 SEER2 / 8.0–8.5 HSPF2
  • Premium efficiency: 20+ SEER2 / 9.0+ HSPF2

Higher Elevation Communities (Anthem, New River, Fountain Hills, Apache Junction)

  • Minimum recommended: 15 SEER2 / 8.0 HSPF2
  • Best value: 17 SEER2 / 8.5 HSPF2
  • Consider: Cold climate heat pumps for New River and higher-elevation areas

Variable Speed vs. Single Stage

Variable-speed heat pumps have the highest SEER2 and HSPF2 ratings and provide better humidity control during monsoon season. Single-stage systems have lower ratings but also lower upfront costs — a solid efficiency single-stage system is a reasonable choice in Arizona's climate.

We install heat pumps throughout Phoenix, Chandler, Gilbert, Mesa, Tempe, Scottsdale, Glendale, Peoria, Surprise, Queen Creek, Apache Junction, Buckeye, Anthem, New River, Maricopa, Casa Grande, and Florence.

Contact Sapper HVAC to discuss the right heat pump SEER2 and HSPF2 ratings for your specific location and home.

What Phoenix Homeowners Say

Recent Customer Feedback

Trusted across Phoenix Metro

“Kevin provided prompt service at a competitive price. Very happy with the install — everything was done cleanly and professionally. Will definitely use Sapper HVAC again.”

George · Phoenix

Mini Split Installation

“Sapper HVAC did an outstanding job. They were on time, very knowledgeable, and the price was fair. The system has been running perfectly since install. Highly recommend!”

Jason · Chandler

Central AC Installation

“Sapper HVAC saved us during an Arizona summer heat wave. Kevin was out within hours, diagnosed the issue, and had us back up and running the same day. Incredible service.”

Sandra · Gilbert

AC Repair

“Veteran-owned and it shows — these guys are professional, punctual, and honest. Got a quote the same day and installation was done the next morning. Couldn't be happier.”

Robert · Mesa

AC Replacement

Read More Reviews

Ready to get a free estimate?

Veteran-owned Sapper HVAC serves the entire Phoenix Metro. Licensed ROC #360142.

Veteran-owned · AZ ROC #360142

Repair, Replacement or New Installation?

Need a repair? Sapper HVAC services systems installed by any contractor with a $149 service call. Planning a replacement or new installation? Estimates are free.

Book a Comfort Specialist Tap to Call